Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 571
53-1003248-01
Methods
6
Parameters
Table 34 contains the parameters required for the method.
Error messages
List of Error Messages
createNatPools
Description
Creates NAT pools.
Parameters
Table 35 contains the parameters required for the method.
Error messages
List of Error Messages
createStaticNatMappings
Description
Creates static NAT mappings.
TABLE 34 Parameters
Name Type Presence Rules Description
isInsideNat boolean Optional Both "insideNat" and
"protocol" cannot be
present.
When set to “TRUE”, clear a specific
NAT entry based on the private and
global IP addresses.
protocol ipProtocolEnum Optional Both "insideNat" and
"protocol" cannot be
present. Valid values are
"TCP", "UDP" and "ICMP".
Clears the NAT entries based on
protocol.
globalIP string Optional Global IP address.
globalPort unsignedInt Optional Valid only when "protocol"
is present, otherwise
ignored.
Global port.
privateIP string Optional Private IP address.
privatePort unsignedInt Optional Valid only when "protocol"
is present, otherwise
ignored.
Private port.
TABLE 35 Parameters
Name Type Presence Rules Description
poolList NatPool[] Mandatory List of NAT pools to be created.