Programmer's Guide (Supporting ADX v03.1.00) Manual

616 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
6
HashInfo
This structure contains the high-level description of hash information.
InterfaceID
This structure is a high-level description of IP Interface.
L4Port
This structure is the high-level description of a port that handles traffic at Layer 4.
TABLE 167 Attributes
Name Type Presence Rules Description
sourceMask string
destinationMask string
TABLE 168 Attributes
Name Type Presence Rules Description
portString string Optional When this parameter is present as
part of the request message, the
parameters portString, slot and port
must be absent.
The interface port
string. For example,
Ethernet “1” or
“1/1” ; Loopback
“lb1” or “lb2”;
Virtual “ve1” or
“ve2”; Management
“mgmt1” only.
interfaceType interfaceTypeEnum Optional This parameter is mandatory and
considered only when name and
portString are NOT present.
The interface type.
slot unsignedInt Optional When this parameter is present as
part of request message,
parameters name and portString
must not be present. This parameter
value is ignored For ADX 1U
configuration.
The interface slot
number.
port unsignedInt Optional When this parameter is present as
part of request message,
parameters name and portString
must be absent. This parameter is
mandatory when slot is present with
a value.
The interface port
number.
TABLE 169 Attributes
Name Type Presence Rules Description
NameOrNumber string Mandatory Identifies the name or number of the layer 4
port.
AssociatedPortNameOrNumber string Optional The name or number of any port with which
this port is associated. This attribute is used
only as an output.