Programmer's Guide (Supporting ADX v03.1.00) Manual

646 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
6
SslTcpProfile
This structure is the high-level description of TCP profile information.
StaticNatMap
This structure is a high-level description of Static NAT mapping.
StaticNatMapFilter
This structure is a high-level description of a filter structure that can be extended to provide
complex operation on the filters.
TABLE 230 Attributes
Name Type Presence Rules Description
assignTcpProfile boolean Mandatory Sets or clears the TCP profile to
SSL profile.
tcpProfileName string Optional Mandatory when
the value of
“assignTcpProfile”
is set to “TRUE”.
TCP profile should
already exist.
Name should be a
maximum of 64
characters.
TCP profile name.
TABLE 231 Attributes
Name Type Presence Rule Description
privateIP string Mandatory Specifies the private IP address.
globalIP string Mandatory Specifies the Global IP address.
priority natPriorityEnum Optional Specifies a value of 1 or 2 and enables
static NAT redundancy. A value of 2
means higher priority, and will own the
NAT IP as long as the system is up.
aclID AclID Optional Only “aclID ->
number” is
considered. The
valid value range is
from 1 to 199.
Specifies the access list ID number.
TABLE 232 Attributes
Name Type Presence Rule Description
simpleFilter StaticNatMapSimpleFilter Mandatory Filter.