Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 651
53-1003248-01
Data structures
6
AclStandardEntry
This structure is a high-level description of the ACL standard entry.
IpProtocol
This structure is a high-level description of IP protocol.
TABLE 241 Attributes
Name Type Presence Rules Description
action aclActionEnum Mandatory Specify ACL action - to permit or
deny.
anyHost boolean Optional Either the anyHost or
host parameter must
be present. Both
cannot be present.
Match on all host addresses.
host AclHost Optional Either the anyHost or
host parameter must
be present. Both
cannot be present.
The ACL source host details.
enableLogging boolean Optional Valid only when the
value of the action
parameter is DENY,
otherwise it is
ignored.
Enables or disables logging for
the DENY action.
remark string Optional Can be a maximum
128 characters in
length.
Adds a comment to the ACL entry
that you are about to create.
TABLE 242 Attributes
Name Type Presence Rules Description
number unsignedInt Optional The valid value range is
from 0 to 255.
Specifies the IPV4 or IPV6
protocol number.
ipv4Name ipProtocolEnum Optional Both the ipv4Name and
the ipv6Name parameters
cannot exist together.
Specifies the IPV6 protocol
well-known name.
ipv6Name ipv6ProtocolEnum Optional Both the ipv4Name and
the ipv6Name parameters
cannot exist together.
Specifies the IPV6 protocol
well-known name.