Programmer's Guide (Supporting ADX v03.1.00) Manual

662 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
6
GlobalTcpMss
This structure is a high-level description of global TCP MSS IPV4/IPV6 configuration.
SynProxyAutoControlConfig
This structure is a high-level description of Syn-Proxy auto-control configuration.
TABLE 262 Attributes
Name Type Presence Rules Description
mssv4 unsignedInt Optional • Valid value range is from
64 to 9216.
• Make sure that the IP
MTU of the interfaces is
always greater than the
MSS value.
This parameter is used to define
the Global TCP MSS IPv4 value
for all SYN-ACK packets
generated by a ServerIron ADX
switch.
mssV6 GlobalTcpMssV6 Optional This parameter is used to define
the Global TCP MSS IPv6
configuration.
TABLE 263 Attributes
Name Type Presence Rules Description
onThreshold unsignedLong Optional Syn-proxy "onThreshold"
value must not be below the
"offThreshold" value.
This parameter is mandatory
when enabling the auto
control.
This parameter will be
ignored when auto control is
disabled.
This parameter is used to define
the rate of SYNs received
per-second at which the
Syn-Proxy feature is enabled on
the ServerIron ADX switch.
offThreshold unsignedLong Optional This parameter is mandatory
when enabling the auto
control.
This parameter will be
IGNORED when disabling
auto control.
This parameter is used to define
the rate of SYNs per second at
which the Syn-Proxy feature is
disabled (after being previously
enabled) on the ServerIron ADX
switch.