Programmer's Guide (Supporting ADX v03.1.00) Manual

664 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Enumerations
6
Enumerations
firewallPredictorEnum
These are the enumerations for a firewall predictor enumerated list.
ackWindowSize unsignedInt Optional Valid value range
is from 1 to
65536. The
default value is
8192.
This parameter
specifies the TCP
window size that the
ServerIron ADX uses
on a SYN-ACK
packet sent back to
a client with
SYN-Cookie.
enableSendResetUsingClientMac twoWayToggleEnum Optional This parameter is to
globally send a
Reset to the client
using the client MAC
address on the
interfaces where
Syn-Proxy is
enabled.
ackValidateMultiplier unsignedInt Optional Valid value range
is from 1 to 7 and
value 65535 is for
disabling the ACK
timer. The default
value is 1.
This parameter
helps set a timer
factor to determine
the time range to
accept a valid ACK
packet.
tcpMss GlobalTcpMss Optional Global TCP MSS
value (IPv4/IPv6) for
all SYN-ACK packets
generated by a
ServerIron ADX
switch.
TABLE 264 Attributes (Continued)
Name Type Presence Rules Description
TABLE 265 Attributes
Parameters Description
TOTAL_LEAST_CONNECTION Parameter load balances traffic based on the total number of
connections
only.
PER_SERVICE_LEAST_CONNECTION Parameter load balances traffic based on the total number of
connections for the traffic's application.
HASH The source and destination mask for the cache distribution hash value.