Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 703
53-1003248-01
Data Structures
7
gslbAdxVipInfo
This structure is the high-level description of ADX virtual IP information.
gslbGlobalControllerParameters
This structure is the high-level description of GSLB protocol parameters.
TABLE 53 gslbAdxVipInfo structure
Name Type Presence Rules Description
ipAddress string Parameter is valid as part of
response message only.
Ignored when part of a
request message.
ADX virtual IP address.
state haStatusEnum Parameter is valid as part of
response message only.
Ignored when part of a
request message.
ADX is an active or standby
ADX for VIP address.
hostRange unsignedInt Parameter is valid as part of
response message only.
Ignored when part of a
request message.
This value indicates the
number of hosts in the host
range.
TABLE 54 gslbGlobalControllerParameters structure
Name Type Presence Rules Description
disableNagle boolean Optional Default value is
"FALSE".
Enable or disable TCP
nagle algorithm for
GSLB communication.
noMasterState boolean Optional Default value is
"FALSE".
Do not use master
state.
tcpPortNumber unsignedInt Optional Default value is
182.
This parameter
specifies the TCP port
number you want the
ADX to use for
exchanging GSLB
information with other
ADX devices.
healthReportInterval unsignedInt Optional Valid value
range is from 2
to 120 seconds.
Default value is
5 seconds.
Configuring the agent
health report interval.
dnsSecServersForDnsQueries boolean Optional Default value is
"FALSE".
Use DNSSEC Servers
for DNS queries.
enableEnhancedRttSmoothing boolean Default value is
"FALSE".
Enable or disable
enhanced RTT
smoothing.
gslbErrorHandling boolean Optional Default value is
"FALSE".
Enable or disable GSLB
error handling.