Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 709
53-1003248-01
Data Structures
7
gslbSiteFilter
This structure is the high-level description of GSLB site filter.
gslbSiteGeographicLocation
This structure is the high-level description of site geographic location.
rttRampUpFactor unsignedInt Optional Valid value
range is
from 1 to 10.
Default
value is 2.
Specifies the
increments in
which successively
new high RTT
samples should be
factored into the
existing RTT value.
rttRampDownFactor unsignedInt Optional Valid value
range is
from 1 to 10.
Default
value is 3.
Specifies the factor
by which
successively new
very low RTT
samples should be
factored into the
existing RTT value.
TABLE 63 gslbSiteFilter structure
Name Type Presence Rules Description
simpleFilter gslbSiteSimpleFilter Optional Simple Filter
TABLE 64 gslbSiteGeographicLocation structure
Name Type Presence Rules Description
location geographicLocationEnum Optional Mandatory when
value of
"enableLocation"
is "TRUE".
By default, the GSLB ADX uses a
site IP address to determine its
geographic location. Alternatively,
you can explicitly identify the
location.
TABLE 62 gslbSite structure
Name Type Presence Rules Description