Programmer's Guide (Supporting ADX v03.1.00) Manual

720 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data Structures
7
policySticky
This structure is the high-level description of sticky configuration in GSLB policy.
rttMetric
This structure is the high-level description of Round Trip Time (RTT) metric in GSLB policy.
numSession numSessionMetric Optional Configure remote ADX available
session capacity metric.
flashback flashbackMetric Optional Configure server flashback speed
metric.
preference boolean Optional Default value is "DISABLED". Enable or disable remote Virtual
ADX's preference metric.
roundRobin boolean Optional Default value is "FALSE". Enable or disable Round Robin
selection metric.
weightedSel
ection
boolean Optional Default value is "FALSE". Enable or disable weighted active
bindings for the host level policy.
TABLE 83 policySticky structure
Name Type Presence Rules Description
sticky boolean Optional Default value is “FALSE”. Enable or disable sticky GSLB
globally or for specific domains
only.
clientIPsPrefixLength unsignedInt Optional Valid value range is from
0 to 32. Default value is
32.
Set the length of client IP prefix.
ipv6ClientPrefixLength unsignedInt Optional Valid value range is from
1 to 128. Default value
is 128.
Set the length of client IPv6
prefix.
age unsignedInt Optional Value is in minutes. Valid
value range is from 1 to
62. Default value is 5
minutes.
Set the age out parameter of
client IP. Number of minutes
before sticky session is cleared.
TABLE 84 rttMetric structure
Name Type Presence Rules Description
enableMetric boolean Mandatory Default value is
"TRUE".
Enable or disable Round
Trip Time metric.
activeRtt activeRttSelectionEnum Optional Default value is
USE_PASSIVE_RTTS_O
NLY.
Active RTT gathering
parameters.
cacheAgeRefresh boolean Optional Default value is
“FALSE”
Enable or disable the
refresh the age of client
prefixes when referenced.
TABLE 82 policyMetrics structure
Name Type Presence Rules Description