Programmer's Guide (Supporting ADX v03.1.00) Manual

736 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
List of Error Messages
A
CONFIG_SYNC_OPERATION_NOT_ALLOWED_ON_REC
EIVER
Cannot perform a Config sync operations on receiver.
Please perform a Config sync operation from the sender
only.
CONFIG_SYNC_OPERATION_UNSUPPORTED_ON_MA
STER
This operation is not supported on MT Master. Please try
with operations other than SSL or OpenScripts.
CONFIG_SYNC_PEER_NOT_CONFIGURED The Config sync peer is not configured. Please configure
a Config sync peer configuration before performing this
operation.
CONFIG_SYNC_SENDER_NOT_CONFIGURED The Config sync sender configuration is not present.
Please configure the Config sync sender configuration.
CONFIG_SYNC_SYM_PRIORITY_MAP_ENTRY_NOT_FO
UND
The specified Sym priority map entry with Sender value =
%u and Receiver value = %u does not exist. Please
specify a valid Sym priority map entry.
CONFIG_SYNC_SYM_PRIORITY_MAP_VALUE_OUT_OF
_RANGE
The specified %s Sym priority map value is invalid. Please
specify a value in the range of %d and %d.
CONFIG_SYNC_SYM_PRIORITY_SENDER_ALREADY_C
ONFIGURED
The specified Sym priority map entry with Sender value =
%u is already mapped with Receiver value = %u. Please
specify a unique Sym priority map entry.
CONFIG_SYNC_SYM_PRIORITY_UNSUPPORTED_ON_
ACTIVE_STANDBY
This operation is not supported on Active/Standby
configuration.
CONFIG_SYNC_SYM_PRIORITY_UNSUPPORTED_ON_
RECEIVER
This operation is not supported on Config sync receiver
device. Please configure Sym priority maps from Config
sync sender device.
CONFIG_SYNC_VLAN_ID_NOT_FOUND The specified Config sync VLAN ID %d is not configured.
Please specify a valid VLAN ID which is already
configured.
CONFIGURE_SYM_PRIORITY Sym priority is not configured. Please configure Sym
priority first.
FILTER_MISSING_PARAM The mandatory parameter filter "%s" is missing. Please
specify the mandatory parameter filter "%s".
FILTER_OPERATOR_UNSUPPORTED The specified filter operator is not supported for the field
type %s. Please specify a valid filter operator (%s) for field
type %s.
FILTER_VALUE_INVALID The specified filter value is invalid. Please specify a valid
filter value for the field type %s.
FILTER_VALUE_INVALID_VIRTUAL_SERVER_SUMMAR
Y
The specified filter value is invalid for Virtual Server
summary. Please specify a valid filter value and operator.
FW_ACL_ID_DOESNOT_EXIST The specified ACL ID %d does not exist. Please specify an
existing ACL ID.
FW_ACL_NUMBER_MISSING The ACL number is missing. Please specify the ACL
number.
FW_EITHER The SlbExternalFirewallInternal and
FirewallExternalSlbInternal configurations are specified.
Please specify either an SlbExternalFirewallInternal or
FirewallExternalSlbInternal configuration.
TABLE 109 List of error messages
Error String Message