Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 737
53-1003248-01
List of Error Messages
A
FW_GROUP_ALREADY_EXIST The specified Firewall group "%s" already exists. Please
specify a new Firewall group.
FW_GROUP_DOESNOT_EXIST The specified Firewall Group "%s" does not exist. Please
specify an existing Firewall Group.
FW_GROUP_MISSING The Firewall Group is missing. Please specify either an
IPv4 or IPv6 group ID.
FW_INFO_MISSING The Firewall configuration is missing. Please specify the
Firewall configuration.
FW_IPV6_GROUP_IPV4_SVR The specified IPv4 Firewall Server %I cannot be bound to
an IPv6 Firewall Group. Please specify the same version
for the server and the group.
FW_IPV6_SVR_IPV4_GROUP The specified IPv6 Firewall Server %I cannot be bound to
the IPv4 Firewall Group. Please specify both the server
and group of the same version.
FW_MAX_HASH_PORTS The specified hash ports exceed the maximum supported.
Please specify a maximum of 16 hash ports.
FW_MAX_SERVER_NAME The specified firewall name exceeds the maximum
supported. Please specify a maximum of 256 firewall
names.
FW_MAX_ZONE The specified zones exceed the maximum supported.
Please specify a maximum of 8 zones.
FW_MISSING_FW_OR_VERSION The mandatory parameter version or Firewall information
is missing. Please specify both the version and the
Firewall information.
FW_OTHER_IPV4_ADDR_TO_IPV6_SERVER_UNSUPP
ORTED
Cannot configure an IPv4 address "%s" to an IPv6 server.
Please specify a valid IPv6 address.
FW_OTHER_IPV6_ADDR_TO_IPV4_SERVER_UNSUPP
ORTED
Cannot configure an IPv6 address "%s" to an IPv4 server.
Please specify a valid IPv4 address.
FW_SERVER_DOESNT_EXIST The specified Firewall Server "%s" does not exist. Please
specify an existing Firewall Server.
FW_TCP_CONF_NOT_SUPPORTED Configuring the firewallHealthCheckl4PortNameOrNum to
port 80/443 is not supported. Please specify a different
port number for firewallHealthCheckl4PortNameOrNum.
FW_ZONE_NAME_MISSING The firewall zone is missing. Please specify a firewall
zone.
FW_ZONE_NUMBER_MISSING The firewall zone number is missing. Please specify the
firewall zone number.
HA_ACTIVE_ACTIVE_FAILED Cannot setup Active/Active configuration with
Active/Standby. Please disable Active/Standby
configuration for setting up Active/Active.
HA_BACKUP_PORT_CONFIG_RELOAD_REQUIRED The Backup Port has been configured successfully. A
system reload is required to complete the configuration.
HA_ADD_BACKUP_PORT_FAILED
HA_ENABLE_VRRP_NOT_SUPPORTED Enable VRRP failed. Must disable VRRP Extended before
enabling VRRP.
TABLE 109 List of error messages
Error String Message