Programmer's Guide (Supporting ADX v03.1.00) Manual

750 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
List of Error Messages
A
NET_MISSING_ADMIN_DISTANCE The Admin distance value is missing. Please specify a
valid admin distance value in the range of %d to %u.
NET_MISSING_BGP_NEIGHBOR_IP The BGP Neighbor IP Address is missing. Please specify
valid IPv4 Address for BGP4 and IPv6 for BGP4PLUS.
NET_MISSING_BGP_VERSION The BGP Version is missing. Please specify a valid BGP
version BGP4 or BGP4PLUS.
NET_MISSING_GLOBAL_TCP_MSS_CONFIG The parameters for global TCP MSS configuration are
missing. Please specify parameters for global TCP MSS
configuration.
NET_MISSING_LOCAL_AS_NUMBER The Local AS Number is missing. Please specify a valid AS
Number in the range of %d to %u.
NET_MISSING_REMOTE_AS_NUMBER The Remote AS Number is missing. Please specify a valid
Remote AS in the range of %d to %u.
NET_MISSING_SWITCH_IP The mandatory parameter Switch IP is missing. Please
specify the mandatory parameter Switch IP.
NET_MISSING_TCP_MSS_FOR_MIN_MSS The mandatory parameter minimum TCP IPv6 MSS is
missing. Please specify the mandatory parameter
minimum TCP IPv6 MSS.
NET_ONLY_ONE_ADDRESS_SUPPORTED_ON_MGMT The specified interface %P already has one IP address
configured. Only one IP address can be assigned to
management interface.
NET_OPERATION_UNSUPPORTED_ON_ROUTER The requested operation is not supported in Router mode.
Please send the request in Switch mode.
NET_OPERATION_UNSUPPORTED_ON_SWITCH The requested operation is not supported in Switch mode.
Please send the request in Router mode.
NET_OSPF_ADVERTISE_NOT_APPLICABLE The advertise option is not applicable for the stubby and
NSSA type. The advertise option is only applicable for the
normal Area type.
NET_OSPF_ALREADY_ENABLED OSPF instance already exists. Only one OSPF instance
can exist at a time.
NET_OSPF_AREA_CANT_BE_CONFIGURED_ON_INTE
RFACE
The specified OSPF Area ID %s cannot be configured on
the interface %P. Please configure the Area at the global
level first.
NET_OSPF_AREA_DUPLICATE_ENTRY The specified Area ID %d already exists. Please specify a
unique Area ID.
NET_OSPF_AREA_ID_CANT_BE_SAME Two different Area types cannot have the same Area ID.
Please specify unique Area IDs.
NET_OSPF_AREA_MISSING The OSPF area is missing. Please configure an OSPF
area.
NET_OSPF_AREA_NOT_CONFIGURED The specified Area ID %d is not available. Please
configure the OSPF Area ID.
NET_OSPF_AREA_RANGE_EXIST_ERROR Failed to delete the OSPF Area as the range exists. Please
specify the IP and the mask to be deleted.
TABLE 109 List of error messages
Error String Message