Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 755
53-1003248-01
List of Error Messages
A
NET_OSPFV3_LOG_NOT_SUPPORTED The OSPFv3 log is not supported. Please specify the
OSPF version to configure the log.
NET_OSPFV3_MD5_AUTH_KEY_ID_NOT_APPLICABLE The specified MD5 authentication key ID option is not
applicable for OSPFv3. Please specify the option for
OSPFv2.
NET_OSPFV3_MD5_AUTH_KEY_NOT_APPLICABLE The specified MD5 authentication key option is not
applicable for OSPFv3. Please specify the MD5
authentication key option for OSPFv2.
NET_OSPFV3_MD5_AUTH_KEY_WAIT_TIME_NOT_AP
PLICABLE
The specified MD5 authentication change wait time
option is not applicable for OSPFv3. Please specify the
MD5 authentication change wait time option for OSPFv2.
NET_OSPFV3_NEIGHBOR_MISSING The OSPFv3 neighbor is missing. Please configure the
OSPFv3 neighbor.
NET_OSPFV3_NETWORK_TYPE_NOT_APPLICABLE The only network type applicable for OSPFv3 is point to
point. Please specify the point to point network type.
NET_OSPFV3_PREFIX_MANDATORY The mandatory parameter prefix is missing. Please
specify a valid prefix.
NET_OSPFV3_ROUTER_ID_NOT_CONFIGURED Failed to enable OSPFv3. Please configure the router ID
before you can enable OSPFv3.
NET_OSPV3_AREA_DOESNOT_EXIST The OSPFv3 Area does not exist. Please configure the
Area under the OSPFv3 instance first.
NET_PRIMARY_ADDRESS_ALREADY_EXISTS The specified interface %P already has one primary IP
address configured. Only one Primary IP address per
subnet can be assigned to an interface.
NET_SRC_IP_DOESNT_EXIST The specified source IP address "%s" does not exists.
Please specify an existing source IP address.
NET_SRC_IP_REAL_SERVER The specified IP %I is defined as source IP under Real
Server. Cannot configure as port-alloc-per-real IP.
NET_SRC_IP_TYPE_MISSING Source IP Type is missing. Please specify a valid source IP
type.
NET_SRC_IP_TYPE_NOT_APPLICABLE The IP type Source IP or Source standby IP is not
applicable in Router code. Please specify the IP type to be
of source NAT IP.
NET_ST_DEF_MGMT_INTERFACE The specified static route is invalid. The default route
cannot point to the management Interface.
NET_ST_DEF_NON_ZERO The specified static route prefix is invalid. The default
route cannot have a non zero prefix.
NET_ST_INTERFACE_DOESNOT_EXIST The specified static route interface does not exist. Please
specify an existing static route interface.
NET_ST_INVALID_DISTANCE The specified static route distance is out of range. Please
specify a valid value in the range of %d to %d.
NET_ST_INVALID_GATEWAY The specified static route gateway is invalid. The gateway
address is invalid
NET_ST_INVALID_INTERFACE The specified interface number is out of range. Please
specify a valid value in the range of %d to %d.
TABLE 109 List of error messages
Error String Message