Programmer's Guide (Supporting ADX v03.1.00) Manual

766 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
List of Error Messages
A
SCRIPT_WARN_MESSAGE_GSLB Warning: The system has both GSLB and the script
configured. GSLB action takes precedence over the
actions set by the script on DNS packets.
SLB_446_IPV6_PREFIX_NOT_CONFIGURED_BINDING
_FAILED
The specified Virtual Server "%s" (%I) cannot be bound
with the Real Server because the SLB 446 IPv6 prefix is
not configured. Please configure the SLB 446 IPv6 prefix
first.
SLB_ADX_IMAGE_RELOAD_REQUIRED The Brocade Virtual ADX image must be reloaded. Please
write memory and then reload or power cycle.
SLB_ALTERNATIVE_MAC_DUPLICATE The MAC address already existsPlease specify a different
and unique MAC address.
SLB_ALTERNATIVE_MAC_MAX_REACHED The maximum alternative MAC entry configuredYou can
only configure a maximum of %d alternative MACs.
SLB_BOOLEAN_HC_CTX_MISMATCH The Boolean health check:"%s" does not belong to context
"%s". Please specify the context in which the Boolean
health check belongs.
SLB_BOOLEAN_HEALTH_CHECK_ALREADY_EXIST The specified Boolean Element Health Check "%s" already
exists. Please specify a new Boolean Element Health
Check name.
SLB_BOOLEAN_HEALTH_CHECK_DOESNT_EXIST The specified Boolean Element Health Check "%s" does
not exist. Please specify an existing Boolean Element
Health Check.
SLB_BOOLEAN_HEALTH_CHECK_NAME_EMPTY The specified Boolean health check name is empty.
Please specify a valid Boolean health check name.
SLB_CONFIG_CONTENT_CHECK_BEFORE_SEND The content-check name is not configured. Please
configure the content-check name before you configure
send.
SLB_CONFIG_CONTENT_CHECK_BEFORE_SEND_AR
RAY
The content-check array is not configured. Please
configure the content-check array before you configure
send.
SLB_CONFIG_CONTENT_CHECK_SEND_DATA_TOO_L
ONG
The configured content-check send data has exceeded
the maximum number of characters allowed. Please
specify the send data that is not more than %d
characters.
SLB_CONFIG_URL_FIRST The status code pair(s) cannot be configured. Please
configure the URL before configuring the status code
pair(s).
SLB_CONFIG_URL_FIRST_BEFORE_CONTENT_MATCH The content-match cannot be configured. Please
configure the URL before configuring the content-match.
SLB_CONTENT_CHECK_ARRAY_FAIL_FOR_KNOWN_P
ORTS
The content-check array cannot be configured for "known"
ports. Please specify only the "unknown" ports for the
content-check array configuration.
SLB_CONTENT_CHECK_ARRAY_FAIL_ON_NON_TCP_
PROFILE
The content-check array can be configured only on a TCP
Port Profile. Please configure the Port Profile to TCP
before configuring content-check array.
TABLE 109 List of error messages
Error String Message