Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 775
53-1003248-01
List of Error Messages
A
SLB_HEALTH_CHECK_MISSING_DNS_QUERY_OR_ZO
NE
The DNS port parameters dns-query or zone are missing.
Please specify either dns-query or zone or both values.
SLB_HEALTHCHECK_INVALID_PROTOCOL The specified protocol "%s" is invalid. Please specify a
valid protocol.
SLB_HEALTHCHECK_MISSING_PORT_FOR_PROTOCO
L
You must configure the port before configuring the
protocol. Please specify a valid port.
SLB_HOST_RANGE_INVALID The specified host range %d ran into an existing Real
Server. Please specify a unique host range.
SLB_HOST_RANGE_IPV6 The host-range feature is not supported for IPv6 real or
Virtual Servers.
SLB_HTTP_KEEPALIVE_PORT_INDEX_ZERO The HTTP port index value is 0; Cannot configure the HTTP
protocol configuration. Please configure the port index
value.
SLB_HTTP_PORT_ERR An error was encountered on the http port.
SLB_INVALID_ARP_INTERVAL The ARP interval value is out of range. Please specify a
valid ARP interval value in the range of 10 to 14400
seconds.
SLB_INVALID_CLOCK_SCALE_INTERVAL The Clock Scale interval value is out of range. Please
specify a valid interval in the range of %d to %d.
SLB_INVALID_CSW_POLICY_FILTER_PARAMETERS CSW Policy filter parameter is invalid or not supported.
Please specify one of the supported operators for filtering.
SLB_INVALID_CSW_REQUEST_RULE_TYPE The Request Rule type for the specified rule "%s" is
invalid. Please specify one of the values: URL |
HTTP_HEADER | HTTP_METHOD | HTTP_VERSION |
HTTP_COOKIE | XML_TAG | TCP_CONTENT |
UDP_CONTENT | NESTED.
SLB_INVALID_CSW_RESPONSE_BEGIN_STATUS_COD
E
The property list name for the specified Response Rule
"%s" is invalid. Please specify the property list name as
BEGIN_STATUS_CODE.
SLB_INVALID_CSW_RESPONSE_END_STATUS_CODE The property list name for the specified Response Rule
"%s" is invalid. Please specify the property list name as
END_STATUS_CODE.
SLB_INVALID_CSW_RESPONSE_HEADER_NAME_TYP
E
The property list name for the specified Response Rule
"%s" is invalid. Please specify the property list name as
HEADER_NAME.
SLB_INVALID_CSW_RESPONSE_RULE_TYPE The Response Rule type for the specified rule "%s" is
invalid. Please specify one of the Response Rule types:
STATUS_CODE | HEADER | BODY.
SLB_INVALID_CSW_RULE_FILTER_PARAMETERS The CSW Rule filter parameter is invalid or not supported.
Please specify one of the supported operators for filtering.
SLB_INVALID_CSW_SCAN_DEPTH The CSW scan depth value is out of range. Please specify
a CSW scan depth value in the range from 1 to 8192.
SLB_INVALID_DNS_DPI_POLICY_FILTER_PARAMETER
S
The DNS DPI Policy filter parameter is invalid or not
supported. Please specify one of the supported operators
for filtering.
TABLE 109 List of error messages
Error String Message