Programmer's Guide (Supporting ADX v03.1.00) Manual

776 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
List of Error Messages
A
SLB_INVALID_GROUP_ID_MISMATCH The specified group ID pair %d-%d is invalid. The group ID
minimum value should not be greater than maximum
value.
SLB_INVALID_HEALTH_CHECK_RETRIES The specified health check retries %u is invalid. Please
specify a valid value in the range of 3 to 31.
SLB_INVALID_INPUT_HEALTH_CHECK_ICMP The port or potocol is applicable only to TCP or UDP
Element Health Check policies. Please specify only the
destination and next hop IP addresses.
SLB_INVALID_INTERVAL The health check interval value is out of range. Please
specify a valid health check Interval in the range of 1 to
120 seconds, and for SSL the range is from 5 to 120
seconds.
SLB_INVALID_INTERVAL_L4 The health check Layer 4 interval value is out of range.
Please specify a valid health check Layer 4 Interval value
in the range of 1 to 120 seconds, and for SSL the range is
from 5 to 120 seconds.
SLB_INVALID_INTERVAL_L7 The health check Layer 7 interval value is out of range.
Please specify a valid health check Layer 7 Interval in the
range of 1 to 120 seconds, and for SSL the range is from
5 to 120 seconds.
SLB_INVALID_LDAP_VERSION The specified LDAP version is invalid. Please specify a
valid LDAP version in the range of 1 to 3.
SLB_INVALID_MATCH_LIST_CHECK_FILTER_PARAME
TERS
The Match List filter parameter is invalid or not supported.
Please specify one of the supported operators for filtering.
SLB_INVALID_MIN_HEALTHY_SERVER The minimum number of healthy servers value is out of
range. Please specify a valid value in the range of %d to
%d.
SLB_INVALID_PASSIVE_PERSIST_ACTION "%s" is not a response header rule. The passive persist
action is valid only for a response header. Please specify
a passive persist action for the response header rule.
SLB_INVALID_PERSIST_ACTION "%s" is not a header and URL type rule. The persist action
is valid only for a header and URL type rule. Please
specify the persist action for header and URL type rules.
SLB_INVALID_PING_INTERVAL The Ping interval value is out of range. Please specify a
valid Ping interval in the range of 1 to 10 seconds.
SLB_INVALID_PING_RETRIES The Ping retries value is out of range. Please specify a
valid Ping retries value in the range of 2 to 10.
SLB_INVALID_PORT_ELEMENT_HEALTH_CHECK_FILT
ER_PARAMETERS
The Element Health Check filter parameter is invalid or
not supported. Please specify one of the supported
operators for filtering.
SLB_INVALID_PORT_POLICY Cannot find Port Policy "%s". Please specify a valid Port
Policy configured on the system.
SLB_INVALID_PORT_POLICY_FILTER_PARAMETERS The port policy filter parameter is invalid or not supported.
Please specify one of the supported operators for filtering.
SLB_INVALID_PORT_PROFILE_FILTER_PARAMETERS The port profile filter parameter is invalid or not
supported. Please specify one of the supported operators
for filtering.
TABLE 109 List of error messages
Error String Message