Programmer's Guide (Supporting ADX v03.1.00) Manual

780 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
List of Error Messages
A
SLB_L4_BRINGUP_CHECK_INTERVAL_OUT_OF_RAN
GE
The specified L4 bringup check interval value %d is out of
range. Please specify a valid value in the range of %d to
%d.
SLB_L4_BRINGUP_INTERVAL_NOT_ALLOWED The Layer 4 bring up interval command does not apply to
this port. Please specify a valid port.
SLB_L4_BRINGUP_RETRIES_NOT_ALLOWED The Layer 4 bring up retries command does not apply to
this port. Please specify a valid port.
SLB_L4_CHECK_ONLY_NOT_ALLOWED The Layer 4 CHECK ONLY command does not apply to this
port. These checks apply only to UDP or TCP ports.
SLB_L7_BRINGUP_CHECK_INTERVAL_OUT_OF_RAN
GE
The specified L7 bringup check interval value %d is out of
range. Please specify a valid value in the range of %d to
%d.
SLB_L7_BRINGUP_INTERVAL_NOT_ALLOWED The Layer 7 bring up interval command does not apply to
this port. Please specify a valid port.
SLB_L7_CHECK_ONLY_NOT_ALLOWED The Layer 7 CHECK ONLY command does not apply to this
port. These checks apply only to UDP or TCP ports.
SLB_LDAP_KEEPALIVE_PORT_INDEX_ZERO The LDAP port index value is 0; Cannot configure the LDAP
protocol configuration. Please configure the port index
value.
SLB_MATCH_LIST_ALREADY_EXIST The specified Match List "%s" already exists. Please
specify a new Match List name.
SLB_MATCH_LIST_DOESNT_EXIST The specified Match List "%s" does not exist. Please
specify an existing Match List.
SLB_MATCH_LIST_MAX_PATTERN_REACHED The number of patterns have reached a maximum value
of 200. Please remove the existing pattern before adding
a new Match List pattern.
SLB_MATCH_LIST_NAME_EMPTY The specified Match List name is empty. Please specify a
valid Match List name.
SLB_MATCH_LIST_PATTERN_EXIST The specified Match List pattern "%s" already exists.
Please specify a new Match List pattern.
SLB_MATCH_LIST_STRING_MISSING The Match List string is missing. Please specify a Simple
string or Start string or End string for a simple pattern
Match List and specify Start String and End String for
compound Match List
SLB_MATCHLIST_NAME_TOO_LONG The specified Match List name is too long. Please specify
a Match List name that is not more than 80 characters.
SLB_MAXIMUM_NUMBER_SYMBOL_EXCEEDED The maximum number of symbols in the nested rule is
exceeded. Please remove or reduce the symbols, or use
simple rules.
SLB_MISSING_CSW_REQUEST_POLICY_TYPE The Request Policy type for the specified policy "%s" is
missing. Please specify one of the types: REQUEST |
DNS_DPI |PROTOCOL_ANY.
TABLE 109 List of error messages
Error String Message