Programmer's Guide (Supporting ADX v03.1.00) Manual

784 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
List of Error Messages
A
SLB_NO_PORT_BINDING The specified port has no Real Server bindings. Please
specify a port which has Real Server bindings.
SLB_NO_URL_KEEPALIVE The specified URL cannot be configured on the port %d.
The URL is not supported for keepalive protocol.
SLB_NODE_NOT_FOUND The health check element is not found. Please specify an
existing health check element.
SLB_NON_SUPPORTED_CLEAR_ATTRIBUTE The specified attribute "%s" is not supported. Please
specify another supported attribute for clearing the
configuration.
SLB_OID_CREATED_UNDER_DIFF_ID The OID "%s" has been created under a different entry ID
%d. Please specify the different OID value.
SLB_OID_NOT_CONFIGURED OID %d has not yet been configured. Please specify the
configured OID value.
SLB_OUT_OF_MEMORY Out of memoryThe system has no memory to service this
request.
SLB_PING_INTERVAL_INVALID The specified ping interval %d is invalid. Please specify a
valid value in the range of %d to %d
SLB_PING_RETRY_INVALID The specified ping retry %d is invalid. Please specify a
valid value in the range of %d to %d
SLB_POLICY_IS_IN_DIFFERENT_CONTEXT The health check policy is in a different context. Specify
the correct context name for the health check policy.
SLB_POLICY_NOT_BOUND The appfw policy "%s" is not bound to the VIP. Please bind
the appfw policy to the VIP and try again.
SLB_POLICY_STILL_BOUND_SERVER The specified policy "%s" is still bound to a Real Server
Port. Please unbind the policy from the port before
deleting the policy.
SLB_POLICY_STILL_BOUND_SERVER_PROTOCOL The policy is bound to a server and so the protocol cannot
be deleted. Please unbind the policy from the protocol
before deleting the protocol.
SLB_PORT_ALREADY_BOUND The specified Real Server Port "%s":"%s" is already bound
to the "%s" Virtual Server. Please specify a Real Server
Port which is not bound to the Virtual Server.
SLB_PORT_BACKUP_NOT_ALLOWED The port backup command does not apply to this port.
Please specify a valid port.
SLB_PORT_BINDING_FAILED Cannot bind a default port to a non-default port. Please
specify a valid port for binding.
SLB_PORT_DOES_NOT_SUPPORT_SESSION_ID_SWIT
CHING
Set session ID switching for this port failed. This port
does not support session ID switching.
SLB_PORT_DOES_NOT_SUPPORT_STATELESS_NO_H
ASH
The specified port %d does not support a stateless no
hash. Please specify valid port which supports stateless
no hash feature.
SLB_PORT_DOES_NOT_SUPPORT_TCP_OFFLOAD The set TCP offload for this port failed. This port %d does
not support TCP offload.
SLB_PORT_DOES_NOT_SUPPORT_UDP_NORMAL_AG
E
The set UDP normal age for this port failed. This port does
not support UDP normal age.
TABLE 109 List of error messages
Error String Message