Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 785
53-1003248-01
List of Error Messages
A
SLB_PORT_NOT_DEFINED_RS The specified port "%s" is not defined on the real server
"%s". Please specify a port defined on the real server.
SLB_PORT_NOT_DEFINED_VS The specified port "%s" is not defined on the virtual server
"%s". Please specify a valid port, defined on the virtual
server.
SLB_PORT_NUMBER_OUT_OF_RANGE The specified port %u is invalid. Please specify a valid
value in the range of 1 to 65365.
SLB_PORT_POLICY_ALREADY_EXIST The specified Port Policy "%s" already exists. Please
specify a new Port Policy name.
SLB_PORT_POLICY_CTX_MISMATCH The Port Policy:"%s" does not belong to context "%s".
Please specify the context in which Port Policy belongs.
SLB_PORT_POLICY_DOESNT_EXIST The specified Port Policy “%s" does not exist. Please
specify an existing Port Policy.
SLB_PORT_POLICY_NAME_EMPTY The specified Port Policy name is empty. Please specify a
valid Port Policy name.
SLB_PORT_PROFILE_ALREADY_EXIST The specified Port Profile "%s" already exists. Please
specify a new Port Profile name.
SLB_PORT_PROFILE_DOESNT_EXIST The specified Port Profile "%s" does not exist. Please
specify an existing Port Profile.
SLB_PORT_PROFILE_NAME_NEEDED A valid Port Profile name is missing. Please specify a valid
Port Profile name.
SLB_PORT_PROTOCOL_MISSMATCH The specified port %d cannot be configured with the
protocol %d. Please configure a compatible port for the
protocol.
SLB_PORT_STRING_INVALID The specified port "%s" is invalid. Please specify a valid
port and then try again.
SLB_PREDICTOR_MAX_VALUE_MISSING The maximum value is mandatory for the dynamic
weighted reverse predictor. Please specify the maximum
value.
SLB_PRIMARY_PORT_BIND_NOT_ALLOWED The primary port is bound to another port. Please specify
a valid port.
SLB_PROTOCOL_PORT_MISSMATCH The specified protocol %d is not allowed with the port %d.
Please configure a compatible protocol for the port.
SLB_PROTOCOL_PORT_MISSMATCH_RADIUS The specified protocol %d is not allowed with the port
RADIUS. Please configure a compatible protocol for the
port.
SLB_PROTOCOL_PORT_MISSMATCH_TCP_HEALTH_C
HECK
The specified UDP protocol %d is not allowed with the TCP
health check. Please configure a compatible protocol for
the port.
SLB_PROTOCOL_PORT_MISSMATCH_UDP_HEALTH_C
HECK
The specified TCP protocol %d is not allowed with the UDP
health check. Please configure a compatible protocol for
the port.
SLB_RADIUS_KEEPALIVE_PORT_INDEX_ZERO The RADIUS port index value is 0; Cannot configure the
RADIUS protocol configuration. Please configure the port
index value.
TABLE 109 List of error messages
Error String Message