Programmer's Guide (Supporting ADX v03.1.00) Manual

806 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
List of Error Messages
A
SYN_PROXY_MISSING_GLOBAL_CONFIG The parameters for SYN proxy global configuration are
missing. Please specify parameters for SYN proxy global
configuration.
SYN_PROXY_MISSING_GLOBAL_CONFIG_ATTRIBUTE The attributes for clearing SYN proxy global configuration
parameters are missing. Please specify at least one
attribute of the SYN proxy global configuration
parameters.
SYN_PROXY_MISSING_OFF_THRESHOLD_PARAM The mandatory SYN proxy auto control parameter
"offThreshold" is missing. Please specify the mandatory
SYN proxy auto control parameter "offThreshold".
SYN_PROXY_MISSING_ON_THRESHOLD_PARAM The mandatory SYN proxy auto control parameter
"onThreshold" is missing. Please specify the mandatory
SYN proxy auto control parameter "onThreshold".
SYN_PROXY_OFF_THRESHOLD_OUT_OF_RANGE The specified SYN proxy parameter "offThreshold" value is
out of range. Please specify a valid value in the range of
%u to %u.
SYN_PROXY_ON_THRESHOLD_LESS_THAN_OFF_THR
ESHOLD
The SYN proxy "onThreshold" value %u should be not
below the "offThreshold" value %u. Please specify SYN
proxy "onThreshold" value greater than the "offThreshold"
value
SYN_PROXY_ON_THRESHOLD_OUT_OF_RANGE The specified SYN proxy parameter "onThreshold" value is
out of range. Please specify a valid value in the range of
%u to %u.
SYS_BAD_ASM_MODULE_NUM Bad ASM module number %d found. Please specify a
valid module number in the range of %d to %d
SYS_BAD_CMD The requested command did not complete successfully.
Please check the command syntax and parameter values.
SYS_BAD_PARAM_FILTER The requested operation did not complete. One or more
invalid data fields were detected in the filter request.
SYS_BANNER_MESSAGE_MAX_LEN_EXCEEDED The specified banner message parameter "%s" has
exceeded the maximum allowed length. Please specify a
valid banner message not more than %d characters.
SYS_BOTH_SUBNETMASK_AND_LENGTH_UNSUPPO
RTED
Both the 'ipMask' and 'ipMaskLength' parameters are not
supported. Please specify either the 'ipMask' or
'ipMaskLength' parameter.
SYS_CLIENT_DUPLICATE_ENTRY_FOUND The specified client IP address "%s" already exists. Please
specify a unique client IP address.
SYS_CLIENT_ENTRY_NOT_FOUND The specified client IP address "%s" is not found. Please
specify an existing client IP address.
SYS_CLIENT_TABLE_FULL The specified client IP address "%s" cannot be added.
The client table is full as it supports only a maximum of
%d entries.
SYS_CLOCK_OR_NTP_TIME_NOT_AVAILABLE The system clock or NTP time is not available.
SYS_DIRECTORY_CREATION_ERROR An error occurred while creating the directory "%s"Please
specify a non-existing and valid directory.
TABLE 109 List of error messages
Error String Message