Programmer's Guide (Supporting ADX v03.1.00) Manual

808 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
List of Error Messages
A
SYS_HA_NOT_CONFIGURED The Server HA is not configured. Please configure HA for
retrieving Active/Standby transitions information.
SYS_HOST_NAME_OR_IP_MISSING The mandatory parameters "hostName" or "hostIP" are
missing. Please specify a valid hostName or hostIP
address.
SYS_INT_PORT_STRING_INVALID The specified portString "%s" is invalid. Please specify a
valid value for portString. %s
SYS_INTERFACE_TYPE_UNSUPPORTED The specified interface type is not supported for this
operation. Please specify one of the following interface
type(s): %s.
SYS_INTERFACE_UNSUPPORTED_ON_SWITCH The %s is not supported in Switch mode. Please specify
the %s input only in Router mode.
SYS_INVAL_VALUE_FOR_PARAM The specified value is out of range for parameter "%s".
Please specify a valid value in the range of %d to %d.
SYS_INVALID_CHASSIS_TRAP_LOG_PARAM The specified chassis trap log parameter is invalid.
Please specify a valid trap log parameter
SYS_INVALID_DATE_PARAM The specified date parameter format is invalid. Please
specify a valid value in the format (mm-dd-yy)
SYS_INVALID_DATE_TIME_PARAM The specified date and time parameter format is invalid.
Please specify a valid value in the format (dd:hh:mm)
SYS_INVALID_DAY_TIME_PARAM The specified day_time parameter format is invalid.
Please specify a valid value in the format (dd:hh:mm)
SYS_INVALID_FILE_FORMAT_PARAM The specified file format parameter is invalid. Please
specify a valid value TEXT or HTML
SYS_INVALID_FILENAME_PARAM The specified filename parameter is invalid. Please
specify a valid filename value.
SYS_INVALID_FLASH_TYPE_PARAM The flashType enum parameter is invalid. Please specify a
valid flash type value PRIMARY or SECONDARY.
SYS_INVALID_IP The specified IP is invalid. Please specify a valid IP.
SYS_INVALID_IP_EX The specified IP address "%s" is invalid. Please specify a
valid IP address.
SYS_INVALID_IPMASK_EX The specified IP Mask "%s" is invalid. Please specify a
valid IP mask in the format(0. 0. 0. 0)
SYS_INVALID_MODULE_NUM The specified ASM module number is invalid. Please
specify a valid Module number in the range of %d to %d.
SYS_INVALID_RELOAD_CONFIG The specified reload configuration is invalid. Please
choose only one of the configuration options at a time:
now or timeAt or timeFromNow.
SYS_INVALID_SERVER_CONFIG_PARAMETER The specified server global configuration parameter is
invalid. Please specify a valid server global configuration
parameter.
SYS_INVALID_TEMPERATURE_CONFIG_ACTION_PARA
M
The specified module temperature action parameter is
invalid. Please specify a valid module temperature action
parameter WARNING or SHUTDOWN.
TABLE 109 List of error messages
Error String Message