Programmer's Guide (Supporting ADX v03.1.00) Manual

86 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
3
AclID
This structure is a high-level description of Access List configuration.
arpEntry
This structure is the high-level description of any ARP cache entry.
TABLE 209 Attributes
Parameters Type Presence Rules Description
number unsignedInt Optional Either "number" or "name" must be
present. Both cannot be present.
Value from 1 to 99 for a standard ACL
Value from 100 to 199 for an extended
ACL.
Specifies the ACL ID.
ipVersion ipVersionEnum This
parameter
value is
ignored
when
parameter
“number” is
present with
a value.
Mandatory parameter for named-ACLs. If
absent, then by default IPv4 is assumed.
IP version IPV4/IPV6 for
named ACLs.
type aclTypeEnum Optional This parameter value is ignored when
parameter “number” is present with a
value. Mandatory parameter while adding
new named ACLs for IPV4.
ACL type
(standard/extended) for
named ACLs.
name string Optional Either "number" or "name" must be
present. Both cannot be present.
Mandatory parameter for named ACLs.
Specifies ACL Name for
named ACLs.
TABLE 210 Attributes
Name Type Required Rules Description
ipAddress string Yes The IP address of the device.
macAddress string Yes The MAC address of the device.
port string Yes The name or number of the port.
ageSeconds unsignedInt Yes 0 The number of seconds the ARP
entry has remained unused.
entryType arpTypeEnum Yes The type of ARP entry:
• static (user-configured)
• dynamic (learned)