Installation and Deployment Guide (Supporting ADX v03.1.00) Instruction Manual
FIGURE 3 Create a new VM - Step 1
4. Enter the name of the new guest VM and select Import existing disk image radio button. Then,
click Forward button to navigate to the next step.
FIGURE 4 Create a new VM - Step 2
5. Enter the complete path to the Brocade Virtual ADX qcow2 image. Alternately, you can use the
Browse button and then click Browse Local to select the Brocade Virtual ADX qcow2 image. Click
Open to insert the complete path.
6. Select Linux as the OS type and Red Hat Enterprise Linux 6 as the Version. Then, click Forward
to go to next step.
Brocade Virtual ADX Installation on KVM Host
Brocade Virtual ADX Installation and Deployment Guide 31
53-1003241-01