Installation and Deployment Guide (Supporting ADX v03.1.00) Instruction Manual

FIGURE 9 Create a new VM - Step 7
12.Select Specify shared device name from the Source device dropdown and assign a name to the
bridge (example: br0) in the Bridge name field.
13.From the Device model field, select the model as e1000 or virtio and click Apply.
14.Click the Add Hardware button below the left menu. The Add New Virtual Hardware dialog box is
displayed.
Brocade Virtual ADX Installation on KVM Host
Brocade Virtual ADX Installation and Deployment Guide 35
53-1003241-01