Manualshelf

Security Guide (Supporting ADX v03.1.00) Instruction Manual

ManualsBrandsBrocade ManualsComputer AccessoriesVirtual ADX
11121314151617181920
6 Brocade Virtual ADX Security Guide
53-1003250-01
VIP Maximum Connection Rate
1
Syntax: show server virtual [name]
The show server virtual command displays the priority fields in its output only when a VIP or global
configuration for traffic prioritization exists.
VIP Maximum Connection Rate
The VIP maximum connection rate feature allow the customer to specify the maximum allowed
connection rate for respective virtual servers, thus providing traffic rate-limiting at VIP level. This
feature can be configured for TCP and UDP as shown below:
Virtual ADX(config)# server virtual vs1 192.168.5.1
Virtual ADX(config-vs-vs1)# max-tcp-conn-rate 1000
Virtual ADX(config-vs-vs1)# max-udp-conn-rate 1000
Syntax: [no] max-tcp-conn-rate <rate-value>
Syntax: [no] max-udp-conn-rate <rate-value>
The rate-value parameter represent the maximum connection rate allowed.
CPU utilization with TRAP
This section describes CPU utilization monitoring for barrel processors (BP) and management
processor (MP).
Show CPU utilization
The show cpu-utilization command displays CPU utilization for the BP and MP within the previous
300 seconds or the last reset of counters within the previous 300 seconds.
Virtual ADX# show cpu-utilization
Per process utilization:
MP : last sec: 0.20%, 5 sec: 0.25%, 60 sec: 0.23%, 300 sec: 0.23%