Security Guide (Supporting ADX v03.1.00) Instruction Manual

Brocade Virtual ADX Security Guide 73
53-1003250-01
Clearing NAT entries from the table
4
Clearing NAT entries from the table
Use the clear ip nat command to manually clear entries from the NAT table.
Syntax: clear ip nat protocol inside global-ip global-port private-ip local-port
The protocol parameter specifies the protocol type and can be tcp or udp plus its global or local
port number.
To clear a specific NAT entry based on the private and global IP addresses, enter the command
such as the following.
Virtual ADX#clear ip nat inside 192.168.1.43 10.10.10.5
This command clears the inside NAT entry that maps private address 10.10.10.5 to Internet
address 192.168.1.43.
Syntax: clear ip nat inside global-ip private-ip
To clear all static and dynamic entries from the NAT translation table, enter the following command.
Virtual ADX#clear ip nat all
Syntax: clear ip nat all