Administrators Guide (Supporting Fabric OS v7.3.0) Manual

FIGURE 17 Port WWN Map dialog box
9. Optional: Click Remove All to clear all of the Port WWN maps.
Configuring port octet speed combination
The Port Admin tab provides an option to set the port octet speed combination. This option is available
only on the following platforms:
• Brocade DCX 8510-8 and DCX 8510-4 with the FC8-32E, FC8-48E, FC16-32, and FC16-48 port
blades
• Brocade 6510
• Brocade 6520
The ports on these hardware models are segregated into 8-port octets. The port octet speed
combination is applied to the eight ports to which the selected port belongs. Based on this port octet
speed combination, the speed options will be available in the Port Configuration wizard.
Port octet speed combinations TABLE 13
Port octet in combination Available port speeds within the octet
1 Auto or Fixed 16G|8G|4G|2G
2 Auto or Fixed 10G|8G|4G|2G
3 Auto or Fixed 16G|10G
NOTE
For FC8-32E and FC8-48E port blades, the port octet speed combination is Auto or Fixed 8G|4G|2G.
You can change the octet combination of a blade or switch. The octet speed must be set consistently
across all members of the port octet.
NOTE
Changing from one combination to another is a disruptive operation. It may cause connected ports to
become No_Sync. The 10 GE license is required in order to set a port to 10 Gbps speed.
Configuring port octet speed combination
Web Tools Administrator's Guide 115
53-1003169-01