Administrators Guide (Supporting Fabric OS v7.3.0) Manual

4. Select the appropriate check box to modify the policy.
5. Click Save.
Enabling the Automatic Port Configuration policy
The Automatic Port Configuration (APC) policy is a global configuration policy for a switch in Access
Gateway mode. By default, this policy is disabled. If you created an N_Port grouping and switching over
to the automatic mode, those port groups are lost. After you enable the APC policy, you cannot define
custom port type configurations, port mappings, Path Failover, and Failback settings.
NOTE
When port configuration is in auto mode, the Configure N-Port Groups, Configure F-N Port
Mappings, and Configure WWN-N Port Mappings options are unavailable.
To enable auto rebalancing from the Switch Administration window, perform the following steps.
1. Click a port in the Switch View to open the Port Admin tab.
2. Select Automatic from Configure > Port Configuration Policy.
NOTE
When Port Configuration Policy is set to Advanced, you can enable the auto-rebalancing options
from the Configure N-Port Groups dialog box through the Port Admin tab.
3. Click Yes in the confirmation window.
4. In the Switch Explorer window, click Configure > Switch Admin. The Switch Administration
window displays.
Enabling the Automatic Port Configuration policy
Web Tools Administrator's Guide 183
53-1003169-01