Administrators Guide (Supporting Fabric OS v7.3.0) Manual

FIGURE 35 Access Gateway Auto Rebalancing
5. Click Refresh.
6. Under the Access Gateway Mode section, do the following:
• Select the N Port Auto Rebalancing check box to enable N_Port rebalancing.
• Select F Port Auto Rebalancing check box to enable F_Port rebalancing.
• Click Manual Balancing and a confirmation dialog box displays. Click Yes to change F Port-N
Port Mapping or click No to cancel the changes.
7. Click Apply to apply the changes.
Using the Access Gateway
184 Web Tools Administrator's Guide
53-1003169-01