Administrators Guide (Supporting Fabric OS v7.3.0) Manual

When you launch Web Tools for the first time, it automatically creates the following directories. These
directories are created under Web Tools directory if they are not available:
• A <Web Tools> directory under the user home directory.
• The Web Tools Switch Support Save directory with the name format <Core Switch Name-Switch IP
Address-Switch WWN>.
The Web Tools Switch Support Save directory contains the following files:
• Log4j.xml
• WebTools.log
• SwitchInfo.txt
The SwitchInfo.txt file contains the following basic switch information:
• Switch name
• Fabric OS version
• Switch type
• Ethernet IPv4
• Ethernet IPv4 subnet mask
• Ethernet IPv4 gateway
The maximum size of the webtools.log file is 5 MB. It is rolled into a new file when the 5 MB file size
limit is exceeded. A backup file named webtools1.log is automatically created. Web Tools maintains
only one webtools.log backup file at a time.
The Web Tools debug dialog box can be used to enable the debug state and level for a module at
runtime.
If you are familiar with XML scripting, you can edit the configuration file (log4j.xml) to collect the data at
startup. If you edit the configuration file, Web Tools need to be restarted. Contact your switch support
supplier for assistance.
SupportSave logs
Beginning with Fabric OS v7.1.0, Web Tools allows you to collect the following Web Tools-related
SupportSave data:
NOTE
Web Tools SupportSave collects logs for troubleshooting Web Tools. To collect switch logs, use the
SupportSave command through the Fabric OS CLI or the Technical Support feature in Brocade
Network Advisor.
• HTML files
• CAL files
• Web Tools logs folder
To collect SupportSave logs, perform the following steps.
1. Click Tools > SupportSave.
The SupportSave dialog box displays.
2. Click Browse to select the location where the SupportSave output must be saved.
SupportSave logs
34 Web Tools Administrator's Guide
53-1003169-01