Administrators Guide (Supporting Fabric OS v7.3.0) Manual

3. To filter events within a certain time period:
• Select the From check box and enter the start time and date in the fields.
• Select the To check box and enter the finish time and date in the fields.
• To filter events beginning at a certain date and time, select only the From check box and enter the
start time and date.
• To filter events up until a certain date and time, select only the To check box and enter the finish
time and date.
4. Click OK.
The filter is enabled and the window is refreshed to show the filtered information.
Filtering events by event severity levels
To filter events by event severity levels, perform the following steps.
1. Open the Switch Events tab as described in Displaying switch events on page 72.
2. Click Filter.
The Event Filter dialog box displays.
3. Select Level.
4. Select the event levels you want to display.
5. Click OK.
The filter is enabled and the window is refreshed to show the filtered information.
Filtering events by message ID
To filter events by message ID, perform the following steps.
1. Open the Switch Events tab as described in Displaying switch events on page 72.
2. Click Filter.
The Event Filter dialog box displays.
3. Select Message ID.
4. Enter the message IDs in the associated field.
NOTE
You can enter multiple message IDs as long as you separate them by commas. You can enter either
the full message ID (moduleID-messageType) or a partial ID (moduleID only). The message ID
filtering is case-sensitive.
5. Click OK.
The filter is enabled and the window is refreshed to show the filtered information.
Filtering events by service component
To filter events by service component, perform the following steps.
1. Open the Switch Events tab as described in Displaying switch events on page 72.
2. Click Filter.
The Event Filter dialog box displays.
Filtering events by event severity levels
Web Tools Administrator's Guide 73
53-1003169-01