Administrators Guide (Supporting Fabric OS v7.3.0) Manual

In the Switch Members dialog box, enter the text string and press Enter . This is an incremental search
and allows 24 maximum characters including the wildcards question mark (?) and asterisk (*). The first
row containing the text string is highlighted. To find the next match, press the down arrow. To find the
previous match, press the up arrow. If the text is not found in the table, the text turns red.
Opening the Admin Domain window
Use the Admin Domain window to perform all Admin Domain configuration procedures.
If you want to configure Admin Domains, you must launch the Admin Domain window from the physical
fabric context. If you are in any Admin Domain other than the physical fabric, the module launches in
read-only mode.
To open an Admin Domain window, perform the following steps.
1. Select a switch from the Fabric Tree and log in when prompted.
Switch View displays information for the selected switch.
2. If you plan to modify the Admin Domain configuration, from the Admin Domain menu, select
Physical Fabric.
3. Click Admin Domain in the Manage section of the Tasks menu.
The Admin Domain window displays.
Refreshing fabric information
When you refresh, the system updates the display of fabric elements only (switches, ports, and
devices). It does not update Admin Domain changes in the Admin Domain window.
This option allows you to refresh the fabric element information displayed at any time.
To refresh the fabric information open the Admin Domain window and click Refresh. The status for the
fabric, including switches, ports, and devices is refreshed.
Refreshing Admin Domain information
Any changes you make in the Admin Domain window are saved to a local buffer. They are not applied
to persistent storage until you invoke one of the transactional operations listed in the Actions menu.
You can refresh the Admin Domain information at any time to reflect changes that might have been
made by other users or to back out of current, unsaved work and start again.
ATTENTION
When you refresh the buffered information in the Admin Domain window, any Admin Domain
configuration changes you made and not yet saved are erased from the buffer and replaced with the
currently enabled Admin Domain information that is saved on the switch.
To update the information in the Admin Domain window with the information saved on the switch,
perform the following steps.
1. In the Admin Domain window, click the Refresh arrow.
2. Click Refresh Admin Domains.
Opening the Admin Domain window
Web Tools Administrator's Guide 89
53-1003169-01