Installation Guide

DIY INSTRUCTIONS:
Transforming a Concrete Slab
to a Paver Patio
PaverBase
STEP 3: ADD A WEED BARRIER FABRIC
Next install a layer of weed barrier fabric over the excavated and compacted area, make sure the weed
barrier fabric overlaps the concrete pad by at least 12 inches. Overlap the edges of the fabric by 4-6”.
STEP 4: SPREAD A THIN LAYER OF SAND
Spread an even layer of sand. Make sure the
surface of the sand is level with the top of the
concrete pad. Use the sand to get the surface
as smooth as possible.
WEED BARRIER FABRIC
LEVELING SAND