Installation Guide

DIY INSTRUCTIONS:
Transforming a Concrete Slab
to a Paver Patio
PaverBase
STEP 7: INSTALL THE PATIO PAVERS
Now the fun really begins! Lay the pavers directly on the Brock PaverBase panels. You can slide the
pavers into place. If you are trying to do a straight line, and the line gets crooked, hammer the row
back in place using a rubber mallet. Do not use the edges of the panels or the pattern on the panels
to try to line up your pavers. Use a string line to ensure straightness.
INSTALL EDGE RESTRAINT.
Once you patio is complete and the pavers are tightly together you will want to hold the perimeter
in place to keep it from moving. To do this simply lay pieces of edge restraint directly on top of the
Brock panels. Then hammer 8-10” landscape spikes through the Brock PaverBase panel making sure
to keep the edge restraint tight against the pavers.
PAVERS
EDGE RESTRAINT