Operating instructions

11
Operation & Hints
Before Operation
10
Let’s Start to Use Your Oven!
1 Plug In
Plug into a properly grounded electrical outlet.
“WELCOME TO PANASONIC REFER TO OPERATING INSTRUCTIONS
BEFORE USE” appears in the Menu Action Screen Display. (This will
immediately cease when any pad is pressed.)
Conversion:
The display automatically appears in English with weight/temperature measurement in imperial. If you
wish to use Spanish or French and metric system and Prompting Guide, press More/Less Pad or Start
Pad or Timer Pad until the desired pair appears on the Menu Action Screen Display. The conversion
should be programmed directly after plugging the oven in.
LANGUAGE CHOICE Lb/kg CHOICE
2 Press
Open the door and place the food on Ceramic Tray in the
oven. Then close the door.
3 Select Power Level
e.g.P10 power –– Press once
(Continue pressing for other power levels –– page 13)
4
Set Cooking Time
5 Press
☛ The time in the Menu Action Screen Display will count down.
Press More/Less Pad Convert into
— ENGLISH
once FRANCAIS
twice ESPANOL
Press Timer Pad Convert into
— ON
3 times OFF
3 times ON
Press Start Pad Convert into
— LB-F
once KG-C
MENU ACTION* ON/OFF
*MENU ACTION SCREEN helps you program your oven by prompting you with the next step.
When you become familiar with your oven, the Prompting Guide can be turned off.
Stop/Reset Pad
Before cooking: One tap clears
your instructions.
During cooking: One tap
temporarily stops the cooking
process. Another tap cancels all
your instructions and time of day
appears in Menu Action Screen
Display.
Start Pad
One tap allows oven to begin
functioning. If door is opened
or STOP/RESET Pad is tapped
once during oven operation,
START Pad must again be
pressed to restart oven.
Prompters:
When a pad is pressed, a beep sound is heard and the corresponding letter or word(s) appear and scroll
across the Menu Action Screen Display. If a pad is pressed and no beep is heard, the unit does not or
cannot accept the instruction. As each pad is pressed the corresponding word(s) scroll across the screen.
Words will automatically appear to prompt user to perform the next step. It is not necessary to wait for the
words to appear before pressing pads for the next step. A two beep sound is heard between stages. At the
end of any complete program, the oven will beep five times.
Control Panel
Menu Action Screen Display
Auto Convection Pad
Bake Pad
Microwave Power Select Pad
Inverter Turbo Defrost Pad
Time/Weight Select Dial
Quick Min Pad
Temperature Select Dial
Popcorn Pad
Timer Pad
Sensor Cook Pad
Combination Pad
Broil Pad
Sensor Reheat Pad
More/Less Pads
Clock Pad
Keep Warm Pad
Cook Navigator:
The flashing indicator signals the next step.