SHELF KIT OWNER’S MANUAL FKSS, FKTAU, FKCHAR, FKWOOD SKSS, SKTAU, SKCHAR, SKWOOD, SKPH FOR USE WITH BROILMASTER® PREMIUM GAS GRILLS RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE.
IMPORTANT INFORMATION CONGRATULATIONS! You have chosen the finest accessory for your outdoor cooking pleasure. Please take time to read this entire manual before installing your premium Broilmaster® Shelf Kit. C22 Parts Diagram ............................................................................................................................... 3 Parts List .................................................................................................................................... .
PARTS DIAGRAM Shelf Kit Page 3
PARTS LIST — SIDE SHELF All repair part orders should be placed through your local Broilmaster® dealer. To locate a dealer in your area, contact Broilmaster Customer Service at 800-851-3153 • WWW.broilmaster.com. To ensure prompt and accurate service, please provide the following information when placing a repair part order: Model Number of your grill, Part Name, Part Number, and Quantity of parts needed. Key No. Part Name Qty. SKCHAR Part No. SKTAU Part No.
SIDE SHELF INSTALLATION Solid Surface Side Shelf Stainless Steel Side Shelf Place solid surface side shelf (1) onto the grill pull handle. Fasten shelf bracket (2) to the bottom of the side shelf with two #10-24 x 1" screws (3). FIGURE 1. Slide the tool hook bar into the side shelf aligning the holes in the tool hook bar (10) and the side shelf. Slide each stainless steel side shelf (8) onto the grill pull handle. Secure with one 1/4-20 screw (9). FIGURE 2.
PARTS LIST — FRONT SHELF All repair part orders should be placed through your local Broilmaster® dealer. To locate a dealer in your area, contact Broilmaster Customer Service at 800-851-3153 • WWW.broilmaster.com. To ensure prompt and accurate service, please provide the following information when placing a repair part order: Model Number of your grill, Part Name, Part Number, and Quantity of parts needed. Key No. Part Name Qty. FKCHAR Part No.
FRONT SHELF INSTALLATION Front Shelf Install the brackets using three of the four mount screws provided as shown by the following figures. Note: The remaining screw is left out to allow the bracket to pivot during installation. FIGURE 4 Insert the front control panel pin through the slots in the bracket. Install the remaining bracket screw at this time.
Pull Handle Pull Handle FIGURE 6 Place two bolts (20) into holes in pull handle (19) and through holes on left or right side of grill bottom. Fasten each bolt with a washer (21), lock washer (22), and nut (23). FIGURE 6. Repeat procedure for the right side. Part Description Handle Shelf Stainless Bracket Bolt 1/4-20 x 1/2 Hex Head Stainless Steel 1/4-20 Hex Nut Stainless Steel 9/32 ID x 5/8 00 Flat Washer Stainless 1/4 ID x 5/8 00 Lock Washer Qty. 1 2 2 2 2 SKPH Part No.