GAS GRILL P3 AND P4 OWNER'S MANUAL

P3, P4 Page 9
GRILL ASSEMBLY
Burner Stabilizing Bracket
(Portable Cart Models Only)
Tip: Test the alignment of the burner stabilizing
brackets before tightening the burner stabilizing
bracket.
Install the burner stabilizing bracket (41) and
fasten with the 10-24 x 3/4 phillips screw and
10-24 wing nut.
Radiation Shield
Place the radiation shield (20) in the grill
bottom. FIGURE 9.
Installing the Burner
Insert the burner assembly into the grill bottom with
the venturi tubes facing the front of the grill. FIGURE
10.
The gas jets from the control valve will be inside the
ends of the venturi tubes when properly installed.
F
IGURE 11.
FIGURE 8
19
8
41
20
INSTALL THIS SIDE UP
FIGURE 9
FIGURE 10
11
Air
Shutter
Shutter Set
Screw
Venturi
Tube
FIGURE 11
36