User's Manual

11Mbps Wireless Access Point User's Manual
18
4.
The utility will show the AP and other wireless devices found in the same network, where
your PC is located.
Note!
If the AP is not shown in the list, please make sure all the cables are well
connected.
5.
Double-click on the AP, then you will access into its built-in web server, and it will show as
below. Then directly click OK button. (Default setting is no user name and password
needed).
Note!
If you cannot access into the built-in web server successfully, please make
sure if your PC now is in the same subnet with AP. Please click right-click on
the AP listed in Wireless Navigator. “Set IP address” option will pop out, then
change IP address of AP to the same subnet as your PC.