Info Pack
18 19
Maintenance and Care:
GAS:
The heaters are constructed using stainless steel and high temperature coated paint to help ensure
maximum life in the outdoor environment. To maximize the life of the heater it is important that frequent
cleaning is performed and appropriate care is taken.
Bromic recommends the following:
Always install with the corresponding Bromic heat shield and clean according to Bromic instructions.
Clean the heater weekly during regular use and at least monthly when not in use. In a salt-air
environment, such as near the ocean, cleaning is recommended more frequently. Heaters must not be
cleaned with cleaning products that are combustible or corrosive.
Over prolonged use may cause slight discolouration of painted surfaces. This is normal and does not
eect the operation of the appliance. Bromic uses specialised high temperature paints and as such
re-painting should not be attempted. Replacement parts can be purchased to restore the heater to its
original appearance from Bromic Pty Ltd. (Refer to parts list in manual).
ELECTRIC HEATERS:
• Ensure there is no excessive build-up of dirt/dust on the reflector surfaces of the heater.
• Ensure heater is not on ,cool to touch and wipe o any dirt/dust with a soft & dry cloth
Servicing (as per Maintenance & Care)
Bromic outdoor radiant heaters require regular servicing to maintain ecient operation. The heaters are
used on a cyclical basis however are exposed to the external elements continuously (both during periods
of use and whilst remaining idle). Regular servicing is therefore required to ensure trouble free operation.
All maintenance should be carried out ONLY by authorised service personnel. Servicing is recommended
at the commencement of each winter season and more frequently in adverse conditions
Please refer to the installation manual for the standard Bromic servicing instructions.