User Manual

10
4. SETTING THE LAMP CHANNEL
With the RFS 2.2 transceiver, you can set the energy control per channel as
you wish as well as adjust the number of lamps per studio.
To set the lamp address, please proceed as follows:
1) Press the "LP" key briefly to enter the lamp setting menu.
2) Set the lamp address with a short press on the "LP" key (several times if
necessary).
To set the number of lamps used in your studio, please proceed as follows:
1) Press the "LP" key for longer to enter the lamp setting menu.
2) Set the number of lamps used in your studio with the scrolling wheel as
required (01 to 40).
3) Save the setting with a short press on the “LP” key.