SEAR Has Te SAGE DR802 Remote Control Remote Control IR Signal Transmitter Stop Rear Wash / Move © Front Wash / Move © Nozzle Position Water Temperature © Seat Temperature © (D User User Memory 1 Memory 2 bode ) rk Rear 5 “© Post Swed Dry. a + Nozzle water Position Pressure Dry Taro.
oilman i THE Shane DR802 Remote Control 1. Stop Stops all wash and dry functions currently operating. 2. Rear Wash / Move Touch once to initiate a rear wash. Touch again to Initiate nozzle oscillation (repetitive forward and backward nozzle movement). 3. Front Wash / Move Touch once to initiate a front wash. Touch again to initiate nozzle oscillation (repetitive forward and backward nozzle movement). 4. Strong Wash / Move Touch once to initiate a strong wash.
DR802 Auxiliary Control Panel Basic functions such as Rear and Front Wash can be used without the remote by utilizing the auxiliary buttons shown below. AUXILIARY CONTROL PANEL 1. Front Wash Button Initiates the front wash function utilizing the settings last used. Press a second time to initiate the Move function. Press again to stop the Move function. 2. Rear Wash Button Initiates the rear wash function utilizing the settings last used. Press a second time to initiate the Move function.
CHEATING THE Sine Using the DR802 NOTE: The wash functions will not work unless the sensor in the seat detects someone sitting down {with the builtin skin conductivity sensor). To overridden the Seat Sensor, please. see the instructions on page 18. Prepare for Wash Sit on the seat to ensure skin-to-seat contact on the Seat Sensor. Warm Water Wash When ready to wash, touch Rear Wash, Front Wash, or Strong Wash on the remote one time to initiate a wash.
18 RECUPERATION THE Sia Special Mode Operations Eco Mode In this mode, the water in the tank and the seat temperature can be reduced to one of two different energy-saving settings. Standard Eco Mode: Touch Eco Mode until the red indicator light is on for Low energy-saving, and the seat and water temperature will be heated to 89.6 °F. Once a person sits on the bidet, the Swash will revert to the last seat and water temperature settings used.
CUE HATING THE Sing Special Mode Operations Activating / Deactivating Silent Mode 1. To activate Silent Mode, touch and hold © — “ Water Pressure/Dry Temp for four seconds. A beep will sound to indicate that Silent Mode has been activated. 2. To deactivate Silent Mode, touch and hold “ — * Water Pressure/Dry Temp for four seconds. Two beeps will sound to indicate that Silent Mode has been deactivated.
20 PALATINE iE sham Special Mode Operations Activating / Deactivating Nightlight The Nightlight is activated at the factory by default. 1. To deactivate the Nightlight, touch and hold “+ for four seconds. This function cannot be performed while sitting on the seat. 2, To activate the Nightlight, touch and hold for four seconds. This function cannot be performed while sitting on the seat. Automatic Deodorizer Your new Swash comes with an Automatic Deodorizer, which turns on when the Seat Sensor is engaged.
