Owner’s Manual SWASH BL97 / EM617 ADVANCED BIDET SEAT
OPERATING THE SWASH EM617 Remote Control Remote Control IR Signal Transmitter 16 Stop 1 Rear Wash / Move 2 Front Wash / Move 3 14 User Memory 1 15 User Memory 2 4 Strong Wash / Move 5 Dry (EM617 model only) Nozzle Position 6 11 Water Pressure and Dryer Temperature (dryer on EM617 model only) Water Temperature 7 12 Nozzle Cleaning Seat Temperature 8 13 Eco Mode Pulse 9 Gentle Mode 10 15
OPERATING THE SWASH BL97 / EM617 Remote Control 1. Stop Stops all wash and dry functions currently operating. 2. Rear Wash / Move Touch once to initiate a rear wash. Touch again to initiate nozzle oscillation (repetitive forward and backward nozzle movement). 3. Front Wash / Move Touch once to initiate a front wash. Touch again to initiate nozzle oscillation (repetitive forward and backward nozzle movement). 4. Strong Wash / Move Touch once to initiate a strong wash.
OPERATING THE SWASH BL97 / EM617 Auxiliary Control Panel Basic functions such as Rear and Front Wash can be used without the remote by utilizing the auxiliary buttons shown below. 1 2 3 AUXILIARY CONTROL PANEL 1. Front Wash Button Initiates the front wash function utilizing the settings last used. Press a second time to initiate the Move function. Press again to stop the Move function. 2. Rear Wash Button Initiates the rear wash function utilizing the settings last used.
OPERATING THE SWASH Using the BL97 / EM617 NOTE: The wash functions will not work unless the sensor in the seat detects someone sitting down (with the built-in skin conductivity sensor). To override the Seat Sensor, please see the instructions on page 18. Prepare for Wash Sit on the seat to ensure skin-to-seat contact on the Seat Sensor. Warm Water Wash When ready to wash, touch Rear Wash, Front Wash, or Strong Wash on the remote one time to initiate a wash.
OPERATING THE SWASH Special Mode Operations Eco Mode In this mode, the water in the tank and the seat temperature can be reduced to one of two different energy-saving settings. Standard Eco Mode: Touch Eco Mode until the red indicator light is on for Low energy-saving, and the seat and water temperature will be heated to 89.6°F. Once a person sits on the bidet, the Swash will revert to the last seat and water temperature settings used.
OPERATING THE SWASH Special Mode Operations Activating / Deactivating Silent Mode 1. To activate Silent Mode, touch and hold “ – “ Water Pressure/Dry Temp for four seconds. A beep will sound to indicate that Silent Mode has been activated. 2. To deactivate Silent Mode, touch and hold “ – “ Water Pressure/Dry Temp for four seconds. Two beeps will sound to indicate that Silent Mode has been deactivated.
OPERATING THE SWASH Special Mode Operations Activating / Deactivating Nightlight The Nightlight is activated at the factory by default. 1. To deactivate the Nightlight, touch and hold “+” for four seconds. This function cannot be performed while sitting on the seat. 2. To activate the Nightlight, touch and hold “+” for four seconds. This function cannot be performed while sitting on the seat. Sleep Mode In Sleep Mode, the Swash essentially powers down.