Full Product Manual

ManualsBrandsBrondell ManualsBathSwash IS707 Advanced Electric Bidet Seat for Elongated Toilet in White

24

Problem Possible Cause(s) Solution(s)

Water leaks from

areas other than the

nozzles

1. Water leaking from the T-valve

2. Water leaking from the bidet hose

connection

3. Water leaking from under the seat

4. Water leaking from behind the seat

1. Make sure that the rubber gasket is

inserted correctly into the T-valve (ﬂat side

down with lip pointing up towards the toilet

tank connection) and ﬁrmly tighten the

connector.

2. Make sure that the bidet hose is correctly

connected and tight. Check any rubber

washers and do not over tighten.

3. Check if there is anything between the

mesh ﬁlter and bidet. Remove, clean, and

reinstall mesh ﬁlter. Check if the ﬁlter is

damaged (see maintenance section).

4. Check the water tank plug in the back of

the seat (see maintenance section under

product storage and use).

TROUBLESHOOTING (cont.)