TRICYCLE hal Sta Before Installation ‘You must have a Clean Spa hand-held bidet or equivalent product with a %" connection sprayer hose in order to install the Hand-Held Bidet Holster with Integrated Shut Off. IMPORTANT Please be advised they the provided cold water T-valve should be Installed at the fll naive under the toilet tank, NOT at the cold water supply coming from the wall.
Shana a Installation Please reed these instructions carefully before installing ‘your Hand-Held Bidet Holster with Integrated Shut Off. Failure to do se could result in flooding, leaking or damage to the product. 1. Existing Toilet Seat Removal a. Lift hinge covers and use Flathead or Phillips head screwdriver to remove the mounting blats, Alternatively, you may need to loosen mounting bolts underneath the seat. b. Remove the toilet seat and set the seat, mounting bolts and hardware aside. 2.
TRICYCLE hal Sta Installation Installing the Hand-He/d Bidet Holster 1. Install Hench Heidi Bidet Holster on Toilet a. Place Hand-Held Bidet Holster on the toilet sa the mounting slots line up with the holes in the toilet fixture. b. Replace the toilet seat on top of Hand-Heidi Bidet Holster and secure using original toilet seat hardware. Make sure to tighten so that the holster and seat do not move. 2.