Full Product Manual
16
CONDITION POSSIBLE CAUSE POSSIBLE SOLUTION
Unit will not
power on
Front Panel is not installed correctly
Remove the Front Panel and
reattach it onto the unit again
Power plug is not properly
inserted into the electrical outlet
Unplug the unit and plug it back
into the electrical outlet
Power plug or cord is damaged
Contact the Brondell Service Center
at 888-542-3355
GFCI outlet was triggered
Press the reset button in the GFCI
outlet
CONDITION POSSIBLE CAUSE POSSIBLE SOLUTION
Fan is not working Unit is not switched on
Ensure the unit is properly plugged
into the outlet. Press the Power
button.
Plastic packaging on filters was not
removed
Remove the plastic packaging and
put the filters back in
Motor requires servicing
Contact the Brondell Service Center
at 888-542-3355
CONDITION POSSIBLE CAUSE POSSIBLE SOLUTION
Fan speed does
not automatically
adjust when the
unit is in Auto
Mode.
Manual Mode is selected
Press the Mode Indicator Button
until “Auto” is illuminated
Air Sensor is dirty
Follow the steps on Page 14 to clean
the Air Sensor
Air Sensor sensitivity is inadequate
for the air quality in the room
Follow the steps on Page 15 to set a
dierent Seasonal Allergy Setting:
• If the Air Quality indicator is Blue,
use a higher sensitivity
• If the Air Quality Indicator is
Purple or Red, use a lower
sensitivity
Air Sensor is broken or is
malfunctioning
Contact the Brondell Service Center
at 888-542-3355
TROUBLESHOOTING