Operating Guide

17
PRODUCT SPECS
CONDITION POSSIBLE CAUSE POSSIBLE SOLUTION
Poor performance,
or not purifying at
optimum capacity.
Filters are due for replacement Replace with a new filter set
Blockage at Air Inlet or Air Outlet
Contact the Brondell Service Center
at 888-542-3355
Plastic packaging on filters was not
removed
Remove the plastic packaging and
put the filters back in
Clearance around Halo is not
adequate for air ventilation.
Ensure that there is clearance of 20
inches on each side and 4 inches
behind the Halo
Missing filters or filters were inserted
in the wrong order
Ensure the filters are placed in the
correct order (see Page 7, Step 4
of this manual)
Recommended room size has been
exceeded
Suggested coverage area is a
medium-to-large room
Model Halo PH10-B
Rated power source 120 V
~
60 Hz
Power consumption 90 W
CADR 156
Maximum recommended
room size
242 sq. ft.
Maximum airflow volume* 197.9 cu. ft./min
Dimensions
13.8” x 8.6” x 24.5”
350 mm x 219 mm x 623 mm
Weight 16.8 lbs. / 7.6 kg