Full Product Manual

12
CONTROL PANEL
BUTTONS
1. Power Button
Powers the Revive on and o. To turn o the power, press and hold the power
button for approximately one second.
5. Light On/O Button
All displays except Air Purification indicator (AIR) and Humidifying indicator (HUM)
are turned o. These are indicated by #6 on the diagram on page 13.
6. Filter Reset Button
Press this button to reset the Filter Change Timer after you have replaced filters
in the Revive (see page 20 for more details).
4. Timer Button
This activates the Auto-O Timer. Pressing this button increases the duration
of the timer from 1 to 12 hours, in one-hour increments (indicated by #7 on the
diagram on page 13). Once the timer has expired, the Revive will power o.
To cancel the auto-o timer, press and hold the Timer Button for two seconds.
3. Mode Button
This button toggles between the three “automatic” Operating Modes: Auto, Eco,
and Allergen. See pages 16–17 for more detail on the individual operating modes.
2. Fan Speed Button
Use it to select the desired fan speed. When you touch the button, the fan speed
indicator changes in ascending order from 1 to 5. 1 is the lowest fan speed, and 5
is the highest.
41 2 3
5 6