Full Product Manual

20
FILTER CHANGE INDICATOR
FILTER CHANGE INDICATOR
When the filter replacement cycle has been reached for one
or more of the filters, the Filter Change Indicator becomes
illuminated. A light will come on next to the name of the filter
(or filters) that needs to be replaced.
1. Follow the steps on page 24 to replace the aected
filter(s).
2. Once that process is complete, press the Filter Reset
Button for two seconds to reset the Filter Change
Indicator.
3. Forced reset of the Filter Change Indicator:
If you change any one of the filters before the
corresponding Filter Change Indicator has illuminated,
you will need to force the timer for that filter to reset.
a. Press and hold the Filter Reset Button for two seconds.
The “HEPA+Carbon” indicator will begin to blink.
b. Once the “HEPA+Carbon” indicator is blinking, press
the Filter Reset Button until the filter (or filters) you
replaced are blinking.
c. Press and hold the Filter Reset Button for two seconds
to reset the timer. If you replaced multiple filters, repeat
this process until all the filter timers have been reset for
the filters you replaced.
NOTE: If there is no activity for ten seconds after
completing step a, this reset mode will be cancelled and the
“HEPA+Carbon” indicator will stop blinking.