Installation Sheet

To clean the bidet nozzle, turn the control dial towards the “Nozzle Cleaning”

position and water should wash over the nozzle.

For the general bidet wash function, turn the dial towards the “Wash” position.

• The further the dial is turned, the higher the water pressure will be.

• To lower the water pressure, turn the nozzle back towards the center.

The nozzle can be easily adjusted by gently

pulling the end of the nozzle forward or

backwards. Once desired position is set, the

nozzle will remain in that position until manually

moved.

OPERATION

USING THE PURESPA

NOZZLE POSITIONING