Installation Guide

INSTALLATION (cont.)
7
3. Connect 7/8” T-Valve to Water Supply Line and
Fill Valve Under Toilet Tank.
a. Install the 7/8” T-valve with one or both of the
large rubber washers to the incoming water
connection on the bottom of your toilet tank.
b. Connect the cold water supply line coming
from the wall to the bottom of the T-valve.
Step 3a
Step 3b
1. Remove existing toilet seat
a. Lift hinge covers and use flathead or Phillips
head screwdriver to remove the mounting
bolts. Alternatively, you may need to loosen
mounting bolts underneath the seat.
b. Remove the toilet seat and set the seat,
mounting bolts and hardware aside.
CONNECTING THE COLD WATER SUPPLY
Step 1b
Step 2c
2. Turn o water supply valve and flush toilet
a. Turn o water supply at the wall to stop flow
of water.
b. Flush toilet and hold down handle to
completely empty toilet tank.
c. Disconnect water supply hose from the fill
valve under the toilet tank.